Tubing Connectors and Fittings
Med Vet International "T"-Plate, 2.7mm, 5 hole Right angle, 32mm L, J0428F
Available for 3.5, 2.7, and 2.0mm screws, either cortical or self-tapping. "T" plates are used almost exclusively for the repair of fractures of the distal radius. In addition, they also may be used in a partial carpal arthrodesis.
Waters Corp Bulkhead Union, 12 mm
This bulkhead union, with a 12 mm size, is specifically designed for use within Vion IMS QTof systems, ensuring a secure and reliable connection.
- Designed for Vion IMS QTof systems.
- Features a 12 mm connection size.
- Serves as a spare part for instrument maintenance.
Grainger 3M, Scotch-Brite, General Purpose Hand Pad, 6" x 9", Fine, 10 Pads/Pack
The Grainger 2F627 is a 1/2 HP, 115V, 1725 RPM, 56C frame, open drip-proof, ball bearing, sleeve bearing electric motor. It has a 48Y frame with a 1.15 service factor and manual overload protector. The motor is totally enclosed, fan cooled (TEFC) with a cast iron body, aluminum end brackets, and 1/2" diameter shaft. It can be wired for 115/230V dual voltage operation. The motor is CSA certified and meets NEMA design B specifications with a maximum ambient temperature rating of 40°C (104°F).
Microsolv Technology Corporation Tubing Connector Fittings, High Pressure, One Piece, 1/16", PEEK, Yellow, Large Combihead with 10-32 Screw Threads. Finger or wrench Tighten, 1 EA.
These all PEEK "Male Nuts" are used to connect PEEK or Stainless Steel tubing in the high pressures zones of HPLC systems. This Combihead Fitting has a partially knurled, rounded head for hand tightening and a "Flat" section of the head for using a wrench for a final quarter turn or to loosen the nut when it is tightly screwed into the fitting. This fitting has 12mm head, 22mm total length (top to bottom) with an 8mm thread length. The beveled inlet hole helps to make threading the tubing through the fitting easier. Color coded to help identify different users or columns while on an instrument.
Chemglass Life Sciences M16 Stainless Steel Ball Valve, Red Handle
M16 STAINLESS STEEL BALL VALVE, RED HANDLE, HUBER CIRCULATOR FITTINGS
Medchemexpress LLC N-(2,4-difluorophenyl)-2-(4-(2-(4-ethylsulfonylphenyl)acetamido)-2-fluorophenyl)-2-methylpropanamide | 2068119-11-7 | 99.3% | 50 MG
S18-000003 is a potent, selective, orally active inhibitor of RORγt intended for preclinical research. It demonstrates sub-30 nM activity against human RORγt in binding assays and shows strong selectivity versus other ROR family members. The compound is supplied as a solid with high purity and is soluble in DMSO for biochemical and cellular studies.
- Potent RORγt inhibition (IC50 <30 nM).
- High selectivity over other ROR family members (IC50 >10 μM).
- High purity of 99.31% suitable for research applications.
- Soluble in DMSO for solution preparation.
- Available in mg-scale quantities for assay development.
Grainger Union Tee 3/8 in PK10
The Parker 16W613 is a composite union tee fitting made from engineered composite material. It has a maximum pressure rating of 300 PSI at 73°F. This union tee has female NPT thread connections and is designed for use with air, water, oil and inert gas systems. The operating temperature range is -40°F to 180°F. Key features include corrosion resistance, vibration dampening, and lightweight. This composite fitting provides a reliable connection method while being an alternative to metal fittings in corrosive environments. With its specifications and capabilities, this union tee can be utilized in a wide variety of industrial applications.
Chemglass Life Sciences PFA 90° Adapter, 1/4" Compression to 1/4" NPT
PFA 90¿ Adapter, 1/4" Compression to 1/4" NPT. PFA 90¿ adapter, compression to male NPT fittings are ideally suited for use in corrosive environments and chemical applications. The fitting design yields a leak-tight connection and requires no special tools to assemble. The connection is achieved by merely inserting the tubing into the fitting assembly and tightening the nut.
AVANTOR MASTERFLEX (VWR LLC) DRUM BUTTRSS ADPTR 2IN W/VITON
NC2869535 DRUM BUTTRSS ADPTR 2IN W/VITON
Grainger T-Nut with Ball Spring 80/20 15 Series
The 80/20 T-Nut 15 Series is a T-slot nut designed for use with 80/20 15 series aluminum extrusion profiles. It is made from zinc-plated steel for corrosion resistance and has dimensions of 0.625" width x 0.375" height x 0.375" depth. The T-nut features a center rib that slides into the T-slot on 15 series extrusions and allows the nut to be securely fastened anywhere along the length of the profile using an M5 screw. This versatile T-nut provides a simple way to attach components to 80/20 15 series aluminum framing.
Microsolv Technology Corporation Tubing Connector Fittings, High Pressure, 1/16th, SS, Hex Heads, Medium Length 10-32 Threads. Ferrules sold separately. 10/PK.
These "Male Nuts" are used to connect Stainless Steel tubing in the high pressures zones of HPLC systems. This 316L stainless steel Fitting has a standard diameter, Hexagonal Head for wrenching the nut. The medium thread length makes this Nut ideal for use on injectors such as the Rheodyne™ and others, where space is limited. Use with Single Cone Stainless Steel Ferrules which are designed to work with this fitting, providing a permanent attachment to SS tubing for a high pressure connection.
Grainger CAT6 RJ45 Inline Coupler White
The Monoprice Inline Coupler 7286 is a BNC inline coupler that allows you to connect two BNC cables together. It is nickel plated and has a 50 ohm impedance. The coupler has a frequency range up to 4GHz. It can handle up to 1kW of power. The dimensions are 0.47 x 0.47 x 1.26 inches. This is a high quality BNC coupler made by Monoprice that is useful for connecting BNC cables in video, CCTV, and other applications.